, , , ,

AXi 8112/10 F3A Motor

Availability:

Out of stock


AXi 8112/10 F3A Motor

$700.00

Out of stock

Compare

The new AXi 8112/10 from Model Motors is a 215kv, 36 pole outrunner designed primarily for F3A aerobatic models with a read-to-fly weight of approximately 4.8kg. This motor has been used very successfully by Mr Pauzuolis with 10s Li-Po batteries on 21×12 and 22×10 propellers amongst others. This combination provides huge torque and efficient power output.
AXi 8112 motors are designed for front mounting. The threaded shaft is 8mm hardened steel approximately 60mm length with an M2 hole in the end for spinner mounting. A prop adaptor is included with two spacers and two nuts along with 5 mounting screws.
The AXi 8112/10 arrives with pre-installed probes for Jeti MT125 temperature sensors and MRPM-AC RPM sensors.
Made in Czech Republic.

Recommended brushless power setups for AXi 8112/10 F3A Motor.
Need help finding a brushless motor setup? Try our motor calculator tool.
Model
Model Weight
Cells
Max. Current
Jeti ESC
Propeller

F3A
4800g (169.3oz)
10s
80.0A/60s
Jeti Spin Pro 99 Opto
22″ x 10″

Do not exceed the recommended propeller sizes.

Technical Details for AXi 8112/10 F3A Motor
No. of cells (LiPo)
10-12
RPM/V
215 Kv
Max. Efficiency
95%
No load current
0.0A
Maximum Load
85.0A
Internal Resistance
0.000Ω
Diameter
87.00mm (3.43″)
Length
34.00mm (1.34″)
Shaft Diameter
8.00mm (0.31″)
Max. Efficiency Current
0
Glow Equivalent

Weight
530.0g (18.7oz.)