Booma R/C 3000mAh Self Balancing LiFeP04 MAXPACK
or 4 fortnightly payments of $13.98 with More info
Out of stock
- Reviews (0)
Flat pack (4×1) 3000mAh Self Balancing LiFeP04 MAXPACK receiver battery with safety charge
The MAXPACK LiFe flight pack range gives you high capacity and high discharge in a 3000mA pack.
These packs have been in ongoing development for 9 years and are trusted by the best pilots on the planet in their models costing upwards to $20,000.
The MAXPACK range have provided the heart of the power system for numerous first place wins in GS Scale, Warbirds, IMAC and GS soaring.
If you have a model you value then the real choice is MAXPACK and here are some more reasons why.
All MAXPACK batteries features the following:
Built in self balancing. No balance charging required. This gives you a simple easy to use solution in flight pack technology.
Built In safety over charge circuit for peace of mind when you charge your packs in the model.
High quality and capacity cells used in the MAXPACK LiFE range are designed to work in harsh virbation critical environments like mining and the oil industry.
Vibration tested so you can feel confident you have the highest quality product availible today.
12 month replacement warranty as standard. Warranty details below.
3 connectors as standard
1 x yellow 20AWG balance charge wire with JR connector
1 x red 20 AWG power output wire with JR connector
1 x red 16AWG power output cable with Deans Ultra Connector
· Self Balancing
· Chemistry -Lithium Iron Phosphate LiFeP04
· Nominal Voltage – 6.4V
· Maximum Current – (10C burst)
· Weight – 170g
· Tested Capacity > 3000mAh tested.
· Charge Voltage 3.650 ± 0.05V
· Absolute Minimum Discharge Voltage 2.0V
· Maximum Charge Voltage 7.2V
· Maximum Recommended Continuous Charge Current – (0.5 to 1C)
· Charge Temperate Range – 0°C to 45°C
· Discharge Temperate Range – 0°C to 60°C
– Dimensions (mm) 72 x 67 x 22
– Dimensions (inches) 2.85 x 2.63 x 0.87
MAXPACKS have been tested in installations suitable for 6 volts without the need for voltage regulators (saving precious weight). It is, of course, an individual decision whether to use voltage regulator(s) in your installation