F3P entry model Super Trino 2018
or 4 fortnightly payments of $58.75 with More info
Super Trino F3P
Out of stock
- Reviews (0)
Kit includes laser cut Aero Depron foam parts, fiberglass hardware.
High quality Carbon profile and equipment combos can be selected as an option.
• Laser cut Aero Depron foam parts
• Fiberglass hardware
• Sheet of Mylar film
• Brushless motor XPower XC2802/44 NicolasPietu Feather
• DPP carbon fiber profiles:
• Carbon fiber strip 3×0.13 mm – 5 meters
• Carbon fiber rod 0.3 mm – 8 meters
• Carbon fiber rod 0.5 mm – 11 meters
• Carbon fiber rod 1.0 mm – 1 meter
• Carbon fiber tube 0.7 mm – 2 meters
• Carbon fiber tube 1.0 mm – 1 meter
If You are looking for Your new F3P model that is capable to perform 2018-2019 F3P sequences and can be build at low costs and in shorter time than carbon plane, we can suggest You an answer:
“It’s Super Trino 2018” 🙂
We have priced this model as Profit Free project in order to support new pilots, that desires to learn F3P and take part in competitions, but can’t afford top level carbon model.
Super Trino 2018 developed by one of top F3P pilots from Czech republic Jan Spatny.
Model is designed to be cost effective to build, but competitive with high end carbon fiber models in flight. Laser cut parts from high quality Aero Depron has very narrow profile, that allows to minimize material usage and therefore achieve extremely light RTF weight comparing with other foamies. With properly selected equipment and build skills it is possible to achieve RTF weight down to 45 grams.
Model flight characteristics has pedigree of its predecessor Super Trino V1, that has shown its potential very well in Czech republic and Slovakia championships, and was beloved by young pilots. Super Trino 2018 has very effective ruder, larger side surface area in order to deal with a lot of knife edge maneuvers in modern F3P sequences.
You can also select one of material and equipment combos, that are also priced Profit Free, so probably You can take one for Your friend also.
We hope, that Super Trino project will help to grow F3P community Worldwide.
Super Trino 2018
Wingspan: 90cm, Fuselage length: 108 cm
RTF weight 45 – 60 gr. depending on setup.
Propeller for this motor we recommend to choose from PT indoor carbon propellers: 9×2.5, 9×2.8 or 9.5×2.5
It is possible to use coaxial thrust unit. Alexey Lantsov AL12-120 2S system with 13 or even 15 inch props will be optimal choice, however some motor mount modifications will be required to install this system.
As this plane RTF weight is above 1S configuration limits, 2S 7.4V system is necessary. We recommend to use lightest possible ESC for 2S. We suggest to use YEP 7A esc with Ultra light pico BEC to power servos. Of course any lightweight ESC with current range 7-10 amps will fit as well
For 4-5 minutes flight this model should consume about 0.5 – 0.6 Wh of energy, depending on weight, thrust systems efficiency, amount of airbrakes and flying style. In most of a cases 100mAh 2S battery would be enough. You can go with 120mAh for more safety or 80mAh for extreme weight saving.
As all F3P foamies, Super Trino 2018 requires fast, reliable, lightweight and precise servos to perform at its best. Our recommendations is to use:
- Hitec 5035HD 1 pcs for ailerons (instock $36.90)
- Spektrum A2010 2 pcs for tail surfaces.
Or other servos with similar technical data.
Remote control system
Minimum 4 Ch proportional radio control system is required. In order to fly modern F3P sequences computerized transmitter radio with Dual rates, Flight modes, Exponents, Mixes and Throttle curve is required.