ARF
Showing 1–24 of 42 results
-
All R/C Airplanes, ARF
E-Flite Conscendo Evolution 1.5m Electric Glider, BNF Basic, EFL01650
Features
Next level Conscendo that is more capable, fun and powerful for all kinds of flying
Stiffer and stronger high density EPO airframe gives increased speeds and aerobatic ability
Folding propeller and brushless outrunner motor compatible with 3S/4S batteries
Telemetry capable 30A ESC delivers real-time motor RPM, current, battery voltage and other data with compatible SMART transmitter and receivers
Up to 15-20+ minutes of flight time using mix of on/off power flying with 3S 1300-2200mAh or 4S 1000-2200mAh batteries
AS3X and SAFE Select flight envelope protection technologies available
AR637TA Spektrum receiver with industry leading DSMX technology and full range telemetry. Note this RX does not have the Vario/Altitude function
Ailerons with four factory installed linkages and servos are included in the 4-channel control
High-density composite reinforced EPO construction is lightweight and tough
Perfect for first timers to the world of powered sailplanes given its ease of launch/fly/land
Easy and fast no glue assembly with two-piece wing and stabs making for easier on-field assemblySKU: EFL01650 -
All R/C Airplanes, ARF
Hangar 9 Ultra Stick RC Plane, 10cc ARF
The Hangar 9 Ultra Stick 10cc ARF lets you fly sport, high-speed, aerobatic precision and 3D, all in the same flight. A modernised model of a proven design, this robust platform is ready to accept a wide range of power systems from gas to electric.
SKU: HAN2345 -
All R/C Airplanes, ARF, Trainer
Phoenix Model Classic RC Plane, .40 Size ARF
Designed for compatibility with both GP and EP flight
Phoenix Models specialize in designing and manufacturing ARF kits.Phoenix Models are committed to bring the best quality Phoenix Models to there customers. Phoenix Models have a large range of quality kits.
SKU: PH-001 -
All R/C Airplanes, ARF, Uncategorized
Phoenix Model Dolphin Low Wing Trainer ARF, .46
This low-wing ARF is a sweet to fly, stable, and beautiful aerobatic model. With stylish fuselage and symmetrical wings, this high-performance ARF aircraft can begin flying in a few hours! All Balsa and plywood construction. Factory pre-covered with beautiful colour graphics. Suits 46-55 glow plug engines or electric power.
SKU: PHN-PH126 -
All R/C Airplanes, ARF
Phoenix Model Tiger 3 RC Plane, .40 Size ARF
Overview
The Tiger 3, with its semi symmetrical wing section, makes this ARF easy to fly, and will have you well on your way to becoming an expert flyer.All Balsa and Plywood construction. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to seperately purchase the nitro engine and radio system, and can fly this plane after 1-2 hours of installation.SKU: PH-036 -
All R/C Airplanes, ARF
Phoenix Model Tiger 3 RC Plane, 15cc ARF
Overview
The Tiger 60 is designed for beginners and intermediate-level pilots. Its semi-symmetrical wings, make it easy to fly at slow speeds. All wood construction. Factory pre-covered with beautiful colour graphics. Pre-glued and pinned hinges on all control surfaces. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to separately purchase the nitro engine and radio system.SKU: PHN-PH066 -
All R/C Airplanes, ARF
Seagull Model Challenger Super Sportster RC Plane, .46 Size ARF
SEA200 SEAGULL CHALLENGER SUPER SPORTSTER FOR .46 SIZE ENGINES
Seagull Models have specialized in designing and manufacturing Almost-Ready-To-Fly (ARF) R/C seagull model aircraft since 1998. Seagull Models have become the largest and most experienced RC model manufacturers in the world.
Seagull Models are built to the finest standards possible and Seagull Models are ARF ready for you to put your radio gear in. Seagull Models have a large range of aircraft in all different skill levels.SKU: SEA-200 -
All R/C Airplanes, ARF
Seagull Models Boomerang EP Trainer RC Plane, ARF
The Boomerang EP has been developed with the beginner flyer in mind. The Boomerang EP is a semi-scale plane, which is easy to fly and quick construct. The airframe is conventionally built using balsa. Plywood is also used, making it stronger than average ARTF, but the design still allows the plane to be kept light. The majority of the model construction has been completed for you. The motor mount has also been fitted with the hinges pre-installed. Flying the BOOMERANG EP is loads of fun.
SKU: SEA-211 -
All R/C Airplanes, ARF
Seagull Models Boomerang V3 Trainer ARF, SEA-27N
Features
- New colour scheme
- Wire main landing gear
- Comes 90% prebuilt from quality components
- All the hardware you need is included
- Easy to fly, with great self-righting characteristics
- Durable and repairable lightweight balsa construction
- Designed for compatibility with Glow Engine and Gasoline Engine
- Easy to convert to electric power
SKU: SEA-27N
