Hobbyzone Carbon Cub S2 RC Plane, BNF Basic

Features
Based on the classic Carbon Cub from Cubcrafters this scale trainer is easy to fly, versatile and capable
Learn to fly made simple with exclusive SAFE technology that will help you avoid crashes
Change flight modes with a flip of a switch between Beginner, Intermediate and Experienced
For smoother landings there is an option Landing Assist Sensor (LAS) that is easy to install
Prevent crashes and loss of control by engaging Panic Recovery mode with one button push
Additional features available through the SAFE Plus upgrade that enables GPS technology so pilot can use Autoland, Virtual Fence, and, Holding Pattern options
Spektrum serial receiver, flight controller and servos are all factory installed
30A telemetry capable ESC included with the efficient and powerful brushless power system
Rolls, loops and inverted (upside down) flight capable
Oversized tyres and rugged landing gear enable use on a variety of surfaces
No special tools or glue required for the quick and easy assembly
Tough lightweight and durable EPO construction
Full range of spare and replacement parts available as well as optional float system for use on water
With RealFlight RC flight simulator you can practice flying this aircraft before purchase
Optional flaps for slow speed control and shorter takeoffs and landings
What you need
Full-range 6–7+ channel Spektrum DSMX®/DSM2® compatible transmitter
3S 11.1V 1300–2200mAh LiPo with EC3™ or IC3™ Connector
Compatible LiPo charger
Specs
Charger
Sold separately
Technology
SAFE Technology
Propeller Size
9×6
Approximate Assembly Time
Less than 1 Hour
Completion Level
Bind-N-Fly Basic
Flaps
Optional
Material
EPO foam
Wingspan
51 in (1300mm)
Minimum Required Radio
4-channel, sold separately
Approximate Flight Time
5-7 minutes
CG (Center of Gravity)
2.4 – 2.7″ (62 – 68mm) back from leading edge of wing at the root
Retracts
No
Motor Size
480
Recommended Motor Battery
3S 2200mAh sold separately
Rudder
Yes
Elevator
Yes
Landing Gear
Fixed main with steerable tail wheel
Length
34 in (865mm)
Transmitter Range
Full
Minimum Speed Control
30A
Spinner Size
1.6 in (40mm) diameter
Wing Tube Length
16.1 in (410mm)
Wing Tube OD
0.39″ (10mm)
Servos
2-aileron, 1-elevator, 1-rudder
View All Specifications