Freewing F/A-18 4S High Performance 64mm EDF Jet Royal Maces PNP


Out of stock

64mm 4S Freewing F/A-18 High Performance EDF Jet (Receiver Ready) PNP
Servos, motor, fan unit and ESC are all pre-installed


Out of stock


The Boeing F/A-18 Hornet is a twin-engine supersonic, all-weather carrier-capable multirole combat jet, designed as both a fighter and attack aircraft (F/A designation for Fighter/Attack). Designed by McDonnell Douglas and Northrop, the F/A-18 was derived from the latter’s YF-17 in the 1970s for use by the United States Navy and Marine Corps. The Hornet is also used by the air forces of several other nations. The U.S. Navy’s Flight Demonstration Squadron, the Blue Angels, has used the Hornet since 1986.

The clean lines, stealth profile, and scale details are all captured in this exceptional 64mm EDF Jet from Freewing Models. Simplicity and durability were major design factors with this model. All airfoil surfaces (main wings, and elevators) are attached to the fuselage using a new modular joiner system which improves strength and allows easy parts replacement. Quality electronic components come pre-installed so you can be in the air in less then one hour.

NEW! Now comes with 12-Blade EDF with 2836-3300kV Brushless Motor
40 Amp Electronic Speed Control, and 4S LiPo capability for High Performance Flight
Scale details including the Navy’s “Royal Maces” livery, painted pilot and cockpit, panel lines and landing gear
5x 9g servos come pre-installed

64mm 4S Freewing F/A-18 High Performance EDF Jet (Receiver Ready) PNP
Servos, motor, fan unit and ESC are all pre-installed

Wingspan: 760mm / 29.92in
Length: 1030mm / 40.5in
Flying Weight: 1000g
Power System: 2836-3300kV Brushless Motor
Speed Control: 40A, XT60 Connector, internal SBEC
Propeller / EDF: 64mm 12-Blade EDF
9g hybrid gear standard with 100mm lead : left elevator
9g hybrid gear reverse with 100mm lead : right elevator
9g hybrid gear standard with 300mm lead : nose gear steering, left aileron, right aileron
Landing Gear: Fixed main landing gear, steerable nose gear.
Required Battery: 4S 14.8V 2200mAh
Required Radio: 4 Channel 2.4ghz radio
Rudder: No
Flaps: No
Ailerons: Yes
Lights: No
Hinge Type: Nylon hinges on all control surfaces
Material: EPO Foam

Needed To Complete
4 Channel Radio – Select a minimum 4 channel radio from our Radio Collection
4 Channel Receiver – Select a minimum 4 channel receiver from our Receiver Collection
4 Cell 14.8V 2200 mAh LiPo Battery with XT60 Connector – EPR22004PROX6
4 Cell Compatible Battery Charger – Select a minimum 4 cell (4S) charger from our Charger Collection

SKU: FJ10712P Categories: ,